How to track electricity usage at home
To track electricity usage at home, take regular readings of the kWh on your meter (or let something take them for you), turn the differences into kWh per hour and per day, and compare days against each other and against the weather. Four ways to do it, from free and manual to live and automatic:
1. Read the meter by hand
Free and needs nothing but a notebook. Read the kWh register at the same time each day; today's reading minus yesterday's is a day of use. It tells you totals, not timing, so it will not show you what runs at 3 a.m. Our guide on how to read my electric meter covers dial, digital and smart meters.
2. Use your utility's portal
Many utilities with smart meters show hourly or 15-minute data in their account portal, usually a day or two late. It is free and accurate for billing, but you need an account, you cannot export much, and you see yesterday rather than now.
3. Plug-in and clamp monitors
A plug-in monitor measures one appliance; a clamp monitor installed in the breaker panel measures the whole house and sometimes individual circuits. Both are live and detailed; a panel install means opening the panel (an electrician's job in many places) and buying the hardware.
4. Read your smart meter's own broadcast
If your meter has an ERT radio module, as most North American smart meters do, it already announces its reading every 30 to 60 seconds. A $30 RTL-SDR dongle and Utilify turn that into live usage: no panel work, no utility login, and gas and water meters are read the same way. You get hour-by-hour charts, the cost at your rate, a week map of electricity usage by time of day, and the outside temperature beside every day.
What to look for once you are tracking
- Base load: the use between 1 and 5 a.m. when the house is asleep. Fridges, routers, standby devices and anything stuck on live here; a high base load is the cheapest thing to fix.
- Peaks: the hours with the most use. On a time-of-use plan, moving laundry or EV charging out of the peak saves money with no change in how much you use.
- Weather: heating and cooling dominate most bills. Comparing a day with past days of the same temperature tells you whether a change helped.
- Steps: a new, permanent jump usually means a new device or a failing one (a well pump that short-cycles, a stuck heating element).
Gas and water too
The same approach works for gas (therms) and water (gallons). Water has one extra use: if the meter never stops moving overnight, something is leaking. Utilify's Leak Watch looks for exactly that, from the meter's packets.
Read your meters with Utilify
Plug in an RTL-SDR dongle and start reading your own meters in seconds. No utility account, no cloud.
More guides
- How to read my electric meter — dials, digital and smart meters.
- How to read your own smart meter with an RTL-SDR — hardware, antenna placement, first readings.
- What is an RTL-SDR dongle? — the $30 receiver that hears your meters.
- Utilify — the smart meter reader app, and Utilify in your browser.